GOOD Home is a biweekly column published in partnership with PuroClean of Wilton | Ridgefield about home safety, maintenance, weather preparedness, and damage prevention, with the goal to save homeowners from the hassle and headaches of severe property damage. Located in south Wilton (24 Danbury Rd., Suite 204), PuroClean provides 24/7 water damage remediation, fire and smoke restoration, and mold and biohazard removal services to the Fairfield County community and across southwest CT and Northeastern Westchester County.
As in all water-related property damage, time is crucial. Floors are at a greater risk for permanent water damage and mold growth if you don’t take care of moisture immediately. Hardwood flooring will absorb moisture more quickly due to its porosity. Besides response time, successful hardwood floor water damage repair depends on the type of flooring, wood, and finish, method of installation, amount of moisture, and replacement value.
For hardwood floor water damage restoration, consider hiring a professional disaster restoration company. They have the necessary knowledge and expertise and use specialized equipment for efficient drying. However, if you want to repair hardwood floor water damage yourself, check out the tips below.
How to repair hardwood floor water damage
- Wear protective gear such as gloves, rubber boots, and a mask.
- Stop the flow of water if the flooding occurred due to a burst pipe, washing machine failure or water heater failure.
- Turn off the power to the affected room until the water has been removed.
- Assess the damages before you begin the restoration to determine whether to clean up or replace the floor. Take photos, list damaged items, and show them to your insurance company.
- Remove any items (carpet, furniture, etc.) from the floor and take them to a dry area.
- Open windows and doors to allow moisture to evaporate more quickly.
- Start removing the excess water with a wet/dry vacuum cleaner or with mops and old cloth. If the water level is deep, use a pump to drain the water. Ask someone to help so you can finish the task faster and avoid further damage.
- Use dehumidifiers, heaters, and fans to speed up the drying process. Place them on top of an elevated surface in the flooded area and close the windows. Direct the fans towards the floor’s surface.
- Clean any debris and mud from the floor with a non-abrasive brush and detergent while the heaters, fans, and dehumidifiers are running. Rinse the floor with clean water and continue to dry the floor.
When dealing with a flooded hardwood floor, act quickly to save your floor from permanent damage and mold growth. Contact a professional flood remediation company, such as PuroClean, that can quickly mitigate the damage and implement the best course of action. Also, learn how to avoid hardwood flooring water damage in the future.
How professionals restore hardwood floor water damage
Determining the type of flooring and installation
Inspection is always crucial when starting to repair hardwood floor water damage. Hardwood flooring comes in a variety of species, such as oak, pine, maple, and cherry. More and more exotic species are being used in flooring. Every type poses different challenges in the drying process because of the varying levels of moisture absorption.
There are also varieties of flooring that look like wood but are not. These floors will sometimes have a laminate on the surface and a particleboard substructure. When moisture seeps beneath these floors, drying is nearly impossible. The inability to dry these surfaces is due to moisture being trapped under the laminate, which acts as a vapor barrier. For more help, call a PuroClean water damage restoration professional to help you evaluate your flooring’s type and condition.
Professionals will also assess the initial installation method of the hardwood flooring. Original installation may be nailed, glued, or installed in a floating method.
- When nailed floors have suffered from water damage, the nails may lift.
- If the floor has been glued onto the substrate, the moisture may release the glue.
- In the case of a floating type floor, it may not be true wood and may be a laminated product. Tongue and groove hardwood flooring may “cup” after absorbing moisture.
Drying the hardwood floor (patience is key)
Once the technicians determine the wood floor type and installation method, drying can begin. Using surface and/or subsurface drying methods and proper dehumidification, technicians can force airflow beneath the surface of the floor (in a positive or negative manner) to remove this moisture. It may also be necessary to access the floor from below for faster drying.
Effective drying of a hardwood floor is a slow process. It will sometimes take seven to 10 days for the floor to release enough water to halt the forced drying process. Removing all the absorbed water from the floor is expensive and nature must be allowed to assist in the process.
The hardwood drying continues until the wood’s moisture levels reach four percent of the floor’s dry standard. At this point, nature will remove the remaining water, although slowly — anywhere from three to six months. Education in this process is crucial for a successful job. Let the restoration professionals of PuroClean help you dry your hardwood flooring properly.
Repairing the finish
Once the hardwood floor is dry, there may still be damage to the floor finish. Finishes, such as waxes and polyurethane, may inhibit the evaporation of the absorbed moisture. They will sometimes have to be removed in the drying process to allow for moisture removal.
If the hardwood floor cups slightly, the finish may check and crack due to the movement of the wood product. This is a normal part of the drying process. Once the floor is completely dry, the floor can be refinished.
To summarize, here’s how to repair hardwood floor water damage:
- Drain the excess water.
- Assess and document the damage.
- Clear the flooded area.
- Clean the dirt and dry the floor using air-blowing equipment and dehumidifiers.
- At the end of this process, if the floor shows signs of cupping and crowning, consult a hardwood flooring installer to get the floor back in shape.
- Alternatively, call a professional restoration company to do all this hard work.
Hardwood floor drying is a specialty. PuroClean of Wilton | Ridgefield has the knowledge to properly evaluate the many types of floors and has specialized equipment to repair hardwood floor water damage. We have saved many floors that have been damaged by water. Contact PuroClean of Wilton | Ridgefield with any questions. Look us up on Linkedin, Facebook, or Instagram; call us at 475.277.2400; or reach out via email.